Low velocity Microtex

LV-M

Displacement air diffuser made from micro-perforated Microtex fabric, designed for very long cleaning intervals with only a minimal increase in pressure loss. Application: Cooling and isothermal ventilation.

Only about 6% of the air flows through the fabric structure, preventing condensation when the temperature falls below the dew point.

They are used to provide an even and draught-free supply of cooled or isothermal air.

ORAVEN Microtex fabric air diffuser

Features

The air is discharged primarily through 40,000 holes per square metre of fabric surface rather than through the fabric structure itself. The required air permeability is achieved using hole diameters between 300 and 700 µm. Variable-focus, pulsed CO₂ lasers create precise perforation geometries.

The thermally fixed holes remain dimensionally stable throughout their entire service life, ensuring that the air permeability remains unchanged. (ORAVEN Microtex)

ORAVEN mounting systems

Q26

Mounting system with anodised aluminium rail for KS06 or full keder, including accessories extending to the underside of the ceiling. Intermediate suspension distances of up to 3,000 mm and profile lengths of up to 6,000 mm.


Installation instructions for double-row aluminium rail


Installation instructions for single-row aluminium rail

S03 + S04

Mounting system with 1.4401 stainless steel cable for Clip-On or SNH25, including accessories extending to the underside of the ceiling. Tensioning fittings are available for unsupported spans of up to 20,000 mm.


Installation instructions for double-row stainless steel cable


Installation instructions for single-row stainless steel cable

Mounting system with anodised aluminium rail for full keder, either suspended below the ceiling or mounted directly to the ceiling using Q26.


Installation instructions for direct-mounted aluminium rail


Installation instructions for suspended aluminium rail

Trevira CS
DIN 4102 B1

Trevira CS

Special fabric made from 100% Trevira CS. Twisted, long-staple fibre yarns ensure the highest quality. Shrinkage below 1%, with no coating, no additives and no condensation formation.

Available RAL colours

Please note: Colours may appear differently depending on the monitor. The actual fabric colour is similar to the corresponding RAL colour.

Trevira CS bioactive
DIN 4102 B1

Trevira CS bioactive

Special fabric made from 100% Trevira CS with antimicrobial silver ions that permanently inhibit the growth of bacterial populations. Its effectiveness is not affected by washing. Effectiveness against Gram-positive and Gram-negative bacteria has been tested.

Standard colour: White

Special colours: All colours from the Pantone colour guide